Relationship

Exit test mode. Disabling Test Mode in Windows

An urgent problem in our time, such a problem as disabling test mode in Windows worries many users. It turns out that the problem is that as soon as the user starts, he may suspect such inscriptions as “test mode” on the screen of his device. After such an inscription, the name of the current operating system and plus the build version are usually indicated there.

In fact, such an inscription will not make the device work worse, but it will not become better either. But there is another problem: not everyone is ready to put up with the reduction in space as a result of the appearance of the inscription. Next, a very important question arises for the user: is it possible to put it where? and how can this really be done?

Test mode in the Windows 10 operating system

Everyone knows that a bunch of applications have always been developed for an operating system like Windows, and the difference between them is not only in hardware, but also in the OS. Especially in order to learn and test any application, you can simply activate the test mode. Moreover, a couple of versions, such as 64-bit, can also remove some restrictions on the type of security, which is quite convenient to use.

In order to activate the test mode in Windows, you just need to do certain steps:

run command line as administrator;
enter the command there bcdedit.exe -set TESTSIGNING ON:\go to ok (enter).

This is how easy it is to activate test mode in Windows.

The desire to enjoy the disabled test mode is quite real. After all, quite often it happens that this mode is simply turned on randomly. Then it is better for the user to disable it and do it as soon as possible. After all, not everyone knows that it is in test mode that the system is most vulnerable and irreparable harm can be caused if precautions are not taken in such a situation in time.

Here's how to turn it off yourself:

call the command line using already known methods;
strictly run it as administrator;
enter the following command here:

Let's press enter now.
Let's restart the computer.

Usually this method helps, but there are also cases when it is not possible to turn off test mode when using it. For such a case, another step was found, which often helps. Here's what you need to do and how to remove Windows 10 test mode using another method:

Completed steps 1-4 of the previous method.
Then we use this command: bcdedit.exe -set loadoptions ENABLE_INTEGRITY_CHECKS
Now we use this command: bcdedit.exe -set TESTSIGNING OFF

Be sure to restart your computer.

It is important to take into account such points that all the methods that were provided to you above are perfect for systems 7, 8, and 10.

How to hide an inscription

Not all users are ready to disable this test mode, and many simply need it, but the inscription gets in the way. You can simply hide such an annoying inscription and that’s it.

You just need to download a program called Universal Watermark Disabler, run it and then click install.

A window will pop up and click “Yes”. Then in the next window “ok”. Turn off the device and you can turn it on and check its operation. Now the program will be connected, but the unpleasant window will simply hide and will not cause inconvenience.

Hello. This is a continuation of the first article about disabling driver digital signature verification, but this time we are disabling it forever (or rather, as long as you need it). First, let's talk about the essence of the Windows test mode. This mode was created for the convenience of developers and allows you to test drivers and some utilities without necessarily checking the digital signature. This allows you to avoid signing each build of a driver or program to check its functionality. This article is fully suitable for Microsoft Windows 10, 8.1, 8, 7 operating systems

Since not everyone needs it to be turned on all the time, I propose dividing the article into two parts:

Enabling test mode
Disabling Windows Test Mode

1. How to enable test mode in Windows 10, 8.1, 8, 7

Open a command prompt with administrator rights; in modern operating systems, just right-click on the Start corner and select the appropriate item:

For an old operating system or for those who have enabled PowerShell in the start menu, read these instructions, all the methods are described there.

In the window that opens, enter the following lines in order:

bcdedit.exe -set loadoptions DISABLE_INTEGRITY_CHECKS bcdedit.exe -set TESTSIGNING ON

After the system restarts, the test mode will be activated, and a reminder about this will always be displayed in the lower right corner:

2. How to disable test mode in Windows 10, 8.1, 8, 7

Let's assume that we are already tired of fiddling with test versions of drivers or we are simply tired of this inscription in the lower right corner, what should we do? Yes, everything is simple, open the command line again as administrator and enter the following lines:

bcdedit.exe -set loadoptions ENABLE_INTEGRITY_CHECKS

And we restart the system, after starting the test mode will be disabled, and the inscription at the bottom of the screen will disappear.

Look like that's it. I hope you found this article useful, click one of the buttons below to tell your friends about it. Also subscribe to site updates by entering your e-mail in the field on the right or subscribing to the group on VKontakte and the YouTube channel. Thank you for your attention

Material from the site geekteam.pro

geekteam.pro

Enable Windows 10 test mode

woodhummer 03/15/2017 - 21:37 Workshop

While working on a computer, situations sometimes arise (for example, when connecting Android devices to flash them) when you need to install specific and unsigned hardware drivers. In this case, it is best to use Windows test mode. Let's consider this issue in more detail.

Enable test mode in the Windows command line

In order for the transition to test mode to be successful, you must first disable the “Secure Boot” mode in the BIOS, so before you begin, you must go into the BIOS (UEFI) settings of your computer. For different motherboard manufacturers, the settings will be slightly different, but we will figure out how to disable “Secure Boot” using the example of a computer we have with an Asus motherboard.

So: launch the BIOS (UEFI) and go to the “Boot” section. In it, go to the “Secure Boot” item and click on it.

A small “OS Type” menu appears, in which we select the “Other OS” item.

We save the parameters and reboot. If there is no “Secure Boot” item in your BIOS menu, then it is already disabled at the hardware level and there is no need to perform the above steps.

Now you can run the “ten” in test mode to remove some OS restrictions, in particular those that are imposed when installing unsigned drivers. Launch the command line (with administrator rights), enter the command:

bcdedit.exe -set loadoptions DISABLE_INTEGRITY_CHECKS

bcdedit.exe -set TESTSIGNING ON

We wait for the completion of each command, after which the system will issue a corresponding notification.

Close the window and reboot. After the reboot, next to the notification panel we will see an inscription reminding you of the mode in which the operating system is now running.

You can disable test mode in a similar way, only the command syntax will be slightly different:

bcdedit.exe -set TESTSIGNING OFF

If the command gives an error, turn off Secure Boot mode in the BIOS.

P.S.

Be careful when performing actions on the command line. And remember - running Windows 10 in test mode reduces the security of the operating system significantly.

updated: 03/15/2017

How to disable Test Mode in Windows 10 (Test Mode)

In Windows 10, more and more attention is paid to security measures to protect the user from various threats and from the failure of installed programs. One of these innovations was the Secure Boot function of UEFI systems, which prohibits the installation of unsigned drivers in the operating system in such a way that only those that were previously approved by the company could be installed. Luckily for users who need to install a specific, unsigned driver for specific reasons, Windows 10's Test Mode feature is available.

Windows 10 Test Mode is a special operating mode that allows users to install unsigned drivers and run software without a digital signature from Microsoft. This mode is good because you can run this or that driver and see the consequences on the system without any risks. When you turn on Test Mode, you will see a watermark on the screen, but what if it turns on by itself? And how to disable test mode in Windows 10.

How to enable or disable Test Mode in Windows 10

1. Remember that when you turn off the test mode, the function may cause the driver or program to not work correctly.
2. Please keep in mind that if you have Secure Boot enabled in your BIOS, we will not be able to enable it manually. (Go into the BIOS and look for the Secure Boot function, disable it if necessary. Usually it is disabled by default and you don’t have to worry).

3. If it worked automatically and the Test Mode watermark appeared on the screen and you just need to disable Test Mode, go straight to step 4.

Step 1: Run Command Prompt as Administrator:

Click Search.
Type cmd.
Right-click on Command Prompt and Run as Administrator.

Step 2. To enable test mode, enter the following commands:

Bcdedit.exe -set TESTSIGNING ON

Step 3. To disable test mode in windows 10, enter:

Bcdedit.exe -set TESTSIGNING OFF

Step 4. If step 3 did not help, then try entering these commands to disable it:

Bcdedit.exe -set loadoptions ENABLE_INTEGRITY_CHECKS

Bcdedit.exe -set TESTSIGNING OFF

Restart your computer or laptop.

How to enable or disable test mode in Windows 7. 8. 10.

In order to use the test mode of the Windows operating system (7. 8. 10.), you need to perform a couple of simple manipulations with the “Command Line” utility - not to be confused with “Safe Mode”...

It is probably unnecessary to talk about all the “benefits” of such regimes, and if you are studying this article, then you yourself are probably aiming for a certain benefit! So... Test mode can be very useful for the average PC user. - for example, to sign (and install) unsigned drivers!

Below in the text, without further ado, we will learn how to launch and disable the test mode of Windows OS using the Command Line, or with one useful utility for the unenlightened user...

disabling digital signature verification for drivers in Windows 7

Our goal is to have a warning about test use of the Windows OS in the lower right corner of the Desktop. That is, this inscription signals that our system is operating in one mode or another.

how to enable or disable test mode in Windows 7 8 10

In order to start (and subsequently turn off) test modes:

...you should, as mentioned, use the command line... (how to launch the command line) in the “lines...” window that opens, enter the following commands: (can be copied)

bcdedit -set TESTSIGNING ON - to enable test mode

bcdedit -set TESTSIGNING OFF - to turn off test mode

Do not forget:

reboot the operating system - only in this case the test mode will be turned off or on.

There may be a more accessible way for someone:

disable test mode using the Driver Signature Enforcement Overrider (DSEO) utility

So: everything is trivial - Driver Signature Enforcement Overrider (DSEO) - download and unpack the archive!

You can download it... well, somewhere here... by the way, you can read something on the page...

You will see something like this window after a successful launch:

After launching “DSEO”, all that needs to be done to enable or disable the test mode in Windows is to select the desired one - respectively: Enable Test Mode (on) or (off) Disable Test Mode.

This method has nuances; if test mode is enabled, it will be enabled constantly.

It must be said that the method with the “DSEO” utility is officially intended for testing new drivers.

As stated: in the lower corner there will be the inscription “Windows Test Mode...”

To remove the inscription (exit test mode), you need to select Disable Test Mode.

The next time you restart Windows, for a few seconds a “selection” of boot options will appear - with signature verification... or without any checks.

We choose the normal boot option... well, or the modes we need...

Here is a complete selection of Hot Keys for Windows - with detailed explanations...

That seems to be all I’ve said on the current topic...

What is not clear, ask questions...

MIG subscription - ERA of useful knowledge!!

If anything is not clear and you have any questions, please share in the comments. Together we can do a lot! Take care of yourself - complitra.ru!

complitra.ru

Disable "Test Mode" in Windows 10

If you came across this article, then you probably became the proud owner of the “Test mode” inscription in the lower corner of the screen, with the name of the installed system and information about its edition and assembly.

Usually, most users confuse such an inscription with system activation and, instead of disabling test mode, they frantically try to activate Windows using the activator.

In this instruction, we will look at what can cause the test mode to appear, and I will also show you the easiest way to disable that same test mode in Windows 10 and forever get rid of the annoying inscription in other modern Windows systems.

The reason for the appearance of the test mode inscription

Most often, the launch of test mode for users occurs unnoticed. Most often, this happens automatically when trying to install drivers that do not have a digital signature or various programs that, during the installation process, could have asked the user to enable test mode to continue the installation, but the user, due to his lack of care, could have pressed the consent button without reading what they wanted him to continue the installation.

But, sometimes there are cases when the user himself simply needs to switch to test mode in order to install some kind of driver for the test device or something like that.

In general, in a nutshell, the test mode is turned on at the moment when the user has disabled driver digital signature verification on the computer.

How to get rid of or disable test mode

So, to completely disable the test mode, we sequentially do this:

Getting rid of test mode in Windows 10 using a third-party utility

There is also another option that will help get rid of the annoying watermark, without disabling it completely, as we did in the first method.

For example, if you know for sure that you have programs or devices on your system that 100% will not work without test mode, then this option is ideal for you as it does not completely disable it, but only removes the watermark from the desktop .

If you don’t know whether something can stop working without test mode, then I recommend that you first use the first option by completely disabling test mode in Windows 10, check the result and, if necessary, turn it back on while removing the sign using this option.

In general, in order to get rid of the inscription, we will use a third-party program called “Universal Watermark Disabler”. It is a free application that will help you get rid of most watermarks similar to the test mode. By the way, according to the developer, the application should work without problems on all versions of ten, eight and 8.1, but, unfortunately, this utility does not support Windwos 7.

I also noticed that more and more videos with reviews of this utility began to appear on Youtube. And from the comments I can conclude that it really helps most people, just like me.

As a result, the test mode will remain in working condition, but the notification message about the enabled mode will no longer appear.

In general, as always, everything is easy and simple. By the way, if you disabled test mode, but then decided to return everything back, you will need to run another command: , in the same command line and, of course, with admin rights.

The hardware configuration of computers on which Windows is installed can differ significantly in a number of parameters, just as the versions and editions of the OS themselves can differ from each other. It is for this reason that applications created for Windows must be universal in terms of compatibility. This is usually the case, but there are software that require a special mode to run, called testing mode.

What is test mode and when is it activated?

Test mode of Windows 10 can be conditionally called a state of “loyalty” of the system to software that does not have the appropriate electronic signatures. In this mode, the system lowers the security level, which allows the administrator to install unstable software. In addition, on 64-bit systems it becomes possible to bypass certain security restrictions.

Under normal conditions, the test mode, as a rule, does not activate by itself. To enable it, an appropriate action by the user or a third-party program is required. The fact that Windows is running in Test Mode is clearly indicated by the inscription “Windows 10 Test Mode...” in the lower right corner of the monitor. The mode itself comes into force if the user disables it in the boot menu or intentionally turns it on using the standard console tool bcdedit or third party utility Driver Signature Enforcement Overrider.

A text note in the corner of the desktop may appear, although not immediately, in modified builds of Windows if the author has decided to deactivate some verification functions. The logo may also mark insider system builds produced by Microsoft. Below we will show you how to exit Windows 10 test mode, but first we will look at how to hide the annoying message from the screen indicating its activity.

How to remove the “Test mode” sign

If you use Test Mode on a regular basis, sooner or later the notification text next to the system tray will start to bother you and, most likely, you will want to get rid of it. But how can I remove the “Test Mode” sign in Windows 10 in the lower right corner without leaving the mode itself? Very easy, just use a small portable utility Universal Watermark Disabler, which can be found without problems on the Internet. Launch it, click the “Install” button and confirm the action.

In this case, Explorer will be completed, the screen will turn black, the user session will automatically end, but when you log in again, you will see that the annoying inscription near the system tray has disappeared. If after some time you want to return it, you need to run the program again and this time click the “Uninstall” button.

In the latest builds of Windows 10, the correct operation of the Universal Watermark Disabler is not guaranteed; for example, in Windows 10 16299, the utility generated the error “Remote procedure call failed,” which, however, did not prevent it from successfully hiding the inscription. However, this method is the most universal.

Windows 10 users also suggested other ways to get rid of the logo, in particular, manipulating files in the directory %userprofile%/AppData/Roaming/Microsoft/Windows/Themes. But as practice has shown, such actions rarely lead to the desired result, or their success is temporary.

How to disable test mode completely

Well, now it’s time to find out how to turn off Windows 10 test mode altogether. This is done very simply using the console tool bcdedit.exe. The method given here works not only in the current tenth version of Windows, but also in “eight” and “seven”. Launch Command Prompt or PowerShell console with administrator privileges and run the command in it bcdedit.exe -set testsigning off and then restart the machine. Done, test mode is deactivated and the notification text in the system tray disappears.

There is, however, a low probability that you won’t be able to disable Windows 10 test mode right away. If after running the command you find that the notemark still “decorates” the lower right corner of the desktop, return to the console and run it again bcdedit.exe -set loadoptions enable_integrity_checks, and then repeat the command mentioned in the paragraph above.

This time the test mode should turn off completely, as well as its watermark should disappear from the screen.

Initially, the “seven” is configured in such a way that it does not allow unsigned drivers to be installed. This is special system protection. It is removed if the Win 7 test mode is activated.

Setting up test mode

The Windows 7 test mode can be enabled as a result of installing any software whose installer has a corresponding script built into it. The average user will easily notice the change in the system from the inscription at the bottom of the screen. It's small in size, but still seriously distracting.

In this case, you will need to deactivate this function.

But there are also opposite situations, for example, when you need to install custom software. And this cannot be done without activating work with unsigned drivers.

Shutdown

Anyone who is bothered by writing on their desktop will be interested in how to disable test mode in Windows 7. This is done from the Command Line. To launch it, open "Start", find the section in the full list "Standard", the required item is located there. Right click on it and then "Launch from...".

In the text field with the blinking cursor, write the request bcdedit.exe -set loadoptions ENABLE_INTEGRITY_CHECKS , and then press Enter, followed by bcdedit.exe -set TESTSIGNING OFF

Note: you won’t be able to insert text; you need to enter it manually using the keyboard.

All that remains is to reboot the system.

Important: if you open the command line without administrator rights, entering the command will be accompanied by the message "Access denied". This means you missed the point. "Launch from...".

Activation

Activating test mode is necessary to install unsigned drivers, for example, those developed by users, which are required to synchronize a device with a computer. But there are other reasons when this function is needed.

Launch Command Prompt again according to the instructions from the previous section. Reactivate the first request again. A success notification will be displayed, then type bcdedit.exe -set TESTSIGNING ON

Some users of the Windows 10 operating system find a mysterious “Test mode” message on their desktop. This inscription is located in the lower right corner of the screen and indicates that the system is operating in test mode.

Test mode is a mode in which the Windows 10 operating system allows users to install and use drivers that are not signed by Microsoft. Typically this mode is used by software developers. If you suddenly have this mode turned on, you can disable it or simply remove the “Test mode” inscription from the desktop.

Disabling Test Mode in Windows 10

In order to disable test mode in Windows 10 you will need. You can open it in different ways, the most reliable way, which will work in any case, is to search in the Start menu. To do this, open the “Start” menu, enter the “cmd” command in the search, then right-click on the found program and select “Run as administrator.”

After this, “Command Prompt” should appear in front of you. The window title should read “Administrator,” which indicates that Command Prompt is running with administrator rights.

Now you can start disabling Windows 10 test mode. To do this, you just need to run the command “ bcdedit.exe -set TESTSIGNING OFF" and restart your computer.

After executing this command and restarting the computer, the “Test Mode” sign should disappear from the desktop.

How to remove the “Test mode” sign from the desktop

If you do not need to disable test mode, but simply remove the “Test mode” inscription from the desktop, then this can be done using the free program Universal Watermark Disabler. This program is designed to remove various watermarks on the operating systems Windows 8, Windows 8.1 and Windows 10. The developer claims that the program works on all builds of Windows starting with Windows 8 build 7850.

In order to hide the “Test mode” message using the Universal Watermark Disabler program, install and run it on your computer. After launching this program, you will see a small window with an “Install” button.

Click on this button and confirm the use of the program by clicking on the “OK” button. After this, your computer will restart, and the “Test Mode” message will disappear from the desktop.